Setting Up Your Range - Bosch HDS252U Manual De Uso Y Cuidado

Setting the Clock (after power to the range has been off)
• Always set the clock after installation or after a power failure. Once power returns to the oven, the clock defaults to 12:00
am.
• The time of day is displayed in hours and minutes.
• The clock time will appear during all oven operations except when the timer or a timed cooking operation is running.
• The oven is preset to a 12-hour clock and indicates AM or PM.
Note: To switch to a 24 hr. clock, see the "Select Function" section,
page 7.
1. CLOCK will be displayed and the hour digits will flash.
Turn knob to select hour and AM or PM. Turning to the
right increases by 1 hour increments; turning to the left
decreases by 1 hour increments.
2. Touch TIME. CLOCK will still be displayed and the
minute digits will flash.
3. Turn knob. Set minutes.
4. Touch TIME and the clock is now set.
Changing the Clock Time
1. Touch Time. TIMER 1 will flash in display.
2. Turn knob to select CLOCK .
3. Touch TIME again and hour digits will flash.
4. Turn knob to change hours.
5. Touch TIME again and minute digits will flash.
6. Turn knob clockwise or counter-clockwise to change
minutes.
7. Touch TIME again and the clock is set.

Setting Up Your Range

Page 6
1 1 1 1 1 2 2 2 2 2 : 00
AM
CLOC
CLOC
BEEP REMINDER
If operation is not completed,the
oven will beep periodically as a
reminder to set clock time. Push
OFF.
0: 00 0: 00 0: 00 0: 00 0: 00
AM
HR:MIN TIMER 1 TIMER 1 TIMER 1 TIMER 1 TIMER 1
TIMER
Helpful Hint
To cancel the TIME selection
when setting the clock, touch
OFF at any time while in the
clock mode.
CLOCK K K K K CLOC
CLOC