Cleaning Cautions; Battery Removal - Remington PRO POWER HC5200 Manual Del Usuario

ENGLISH

, CLEANING CAUTIONS

• Only the attachment guide combs and trimmer blade may be removed from
the product for cleaning.
• Cleaning should be done with a soft brush, such as the brush supplied with
the product.
• Do not rinse under water.
• Do not use harsh or corrosive cleaners on the units or their blades.
• Ensure the appliance is switched off and unplug from the main outlet before
cleaning

BATTERY REMOVAL

• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing
the battery.
• Ensure that the clipper is discharged of all power and disconnected from the
mains.
• Remove the screw cover from back housing.
• Using a small screwdriver, remove (1) screw from the bottom of the clipper.
• Pry the front panel from the front housing and expose the PCB and batteries.
• Pry the PCB assembly from the housing.
• Cut or break the wire stamps on the both end of the batteries and remove the
batteries.
• The battery is to be disposed of safely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
7