Publicidad
Idiomas disponibles
Idiomas disponibles
CEBORA S.p.A.
IMPORTANT: BEFORE STARTING THE
EQUIPMENT, READ THE CONTENTS OF
THIS MANUAL, WHICH MUST BE STORED
IN A PLACE FAMILIAR TO ALL USERS
FOR THE ENTIRE OPERATIVE LIFE-SPAN
OF THE MACHINE. THIS EQUIPMENT
MUST BE USED SOLELY FOR WELDING
OPERATIONS.
1
SAFETY PRECAUTIONS.
ARC WELDING AND CUTTING CAN BE
HARMFUL TO YOURSELF AND OTHERS.
The user must therefore be educated against the
hazards,
summarized
welding. For more detailed information, order
the manual code 3.300.758.
ELECTRIC SHOCK - May be fatal.
• Install and earth the welding machine
according to the applicable regulations.
• Do not touch live electrical parts or
electrodes with bare skin, gloves or wet
clothing.
• Isolate yourselves from both the earth and the
workpiece.
• Make sure your working position is safe.
FUMES AND GASES - May be hazardous to
your health.
• Keep your head away from fumes.
EN
ES
• Work in the presence of adequate
ventilation, and use ventilators around
the arc to prevent gases from forming in the
work area.
ARC RAYS - May injure the eyes and burn the
skin.
• Protect your eyes with welding masks
fitted with filtered lenses, and protect
your body with appropriate safety
garments.
• Protect others by installing adequate shields or
curtains.
RISK OF FIRE AND BURNS.
• Sparks (splatters) may cause fires and
burn the skin; you should therefore
make sure there are no flammable
materials in the area, and wear appropriate
protective garments.
3301042
below,
inherent
in
NOISE.
• This machine does not directly
produce noise exceeding 80dB. The
plasma cutting/welding procedure may
produce noise levels beyond said limit; users
must
therefore implement
required by law.
PACEMAKER.
• The magnetic fields created by high currents
may affect the operation of pacemakers. Wearers
of vital electronic equipment (pacemakers) shall
consult their physician before beginning any arc
welding, cutting, gouging or spot welding
operations.
EXPLOSIONS.
• Do not weld in the vicinity of
containers under pressure, or in the
presence of explosive dust, gases or
fumes. All cylinders and pressure regulators
used in welding operations should be handled
with care.
ELECTROMAGNETIC COMPATIBILITY.
• This machine is manufactured in compliance
with
the
instructions
harmonized standard EN50199, and must be
used solely for professional purposes in an
industrial environment.
• There may be potential difficulties in ensuring
electromagnetic compatibility in non-industrial
environments.
• In case of malfunctions, request assistance
from qualified personnel.
DISPOSING
OF
ELECTRICAL
ELECTRONIC EQUIPMENT.
•
Do
not
dispose
equipment together with normal waste!
In observance of European.
• Directive 2002/96/EC on waste from
electrical and electronic equipment and its
implementation in national legislation, electrical
equipment at the end of its life-span must be
collected separately and sent to an ecologically
compatible recycling plant.
• The owner of the equipment must ask our local
representative about approved collection plants.
Applying this European Directive will improve
the environmental situation and human health.
4
all
precautions
contained
in
the
AND
of
electrical
22-10-2018
Publicidad
