AFA AFLZ02 El Manual Del Propietario página 17

CLEANING AND CARE OF FILTER GASKET
1
With an adjustable wrench and rag,
remove the showerhead from the
shower arm by unscrewing the ball
joint in a counter-clockwise direction.
4
Flush the lter gasket with water.
2
The lter gasket is located at the
opening of the showerhead ball
joint.
5
Reinstall the lter gasket into the ball
joint threads.
17
3
Filter
gasket
Remove the lter gasket from the ball
joint. If necessary, use needle-nose
pliers (not provided) and set aside.
6
Clean the left over Plumber's Tape
from shower spout threads and apply
a new single layer of plumber's tape.
Reattach the showerhead by screwing
the ball joint clockwise into the shower
spout threads. Tighten with an
adjustable wrench and rag.