Worx WX128 Manual Original página 11

OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book crefully.
INTENDED USE
The machine is intended for driving in and loosening
screws as well as for drilling in wood, metal and plastic.
ASSEMBLY AND OPERATION
ACTION
BEFORE OPERATION
Removing the battery pack
Charging the battery
Installing the battery pack
ASSEMBLY
CHUCK ADJUSTMENT
WARNING: Always lock off trigger switch and
disconnect tool from power source when changing
accessories. Always ensure the bit is secure before
starting the tool. Damage to the Chuck or a loose bit may
cause possible personal injury.
Removing the bits
Inserting the bits
OPERATION
FORWARD/REVERSE ROTATION
CONTROL
WARNING: Never change the
direction of rotation when the
chuck is rotating, wait until it has
FIGURE
stopped!
TWO-SPEED GEAR CONTROL
See Fig. A1
TORQUE ADJUSTMENT
SCREWDRIVING, DRILLING
See Fig. A2
OPERATING THE ON/OFF SWITCH
WARNING: Do not operate
See Fig. A3
for long periods at low speed
because excess heat will be produced
internally.
See Fig. B1
See Fig. B2
See Fig.
C1,C2,C3
See Fig. D
11
See Fig. E
See Fig. F