Settings - Sartorius Combics Option E5 Instrucciones De Instalación

Settings

– The following functionalities for the Alibi memory can be
accessed in the menu under "SETUP":
– Midrics, Midrics, Sigmun series:
Setup: CLR.LEG.S (only in service mode)
Setup: LEG.S.PER
– Combics series:
Setup: Alibi memory: CLEAR (only in service mode)
Setup: Alibi memory: PERIOD
CLR.LEG.S / CLEAR
The service mode settings are used to clear the Alibi memory
(duration ~ 2 min). This procedure is only possible when the
service mode is active (otherwise the menu item is not displayed)
and the menu access switch is open.
LEG.S.PER / PERIOD
The user must enter the required storage period for the Alibi
memory (in days).
For description, see under Features.
– The Alibi memory display can be accessed in the menu under
"Info":
LEGAL.ST / ALIB.MEM
4
Alibi Memory Configuration
– In the menu "Setup", you can configure the printout
for the Alibi memory:
Midrics, Signum series:
Setup: PRTPROT: 7.18
Combics series:
Setup: Print: log: DAT.RECORD
Number of printed data records:
– Choose a number between '1* and 255':
Midrics, Signum: 7.18.2
Combics: SPEC.QTY
– Choose 'all' data records
'All' data records will be printed starting from
the current transaction no.
Midrics, Signum: 7.18.1.1
Combics: ALL
– The number of data records selected under
7.18.2 will be printed from the alibi memory.
Midrics, Signum: 7.18.1.2
* Standard
The selected number is printed as of the current data record.