Warranty Conditions - Lavor Missouri Manual Del Usario

WARRANTY CONDITIONS

All our machines are subjected to strict tests and are
covered against manufacturing defects by a 12 month
guarantee. If your high pressure washer or accessories
are handed in for repair, a copy of the receipt must be
enclosed.
Guarantee repairs are being made on the following
conditions:
- That defects are attributable to flaws or defects in materials
or workmanship. (Defects not clearly attributable to
materials or manufacture shall be examined by our
Technical Assistance Center or in our plant and shall be
charged according to the outcome of the exaicination).
- That the directions of this instruction manual have been
thoroughly observed.
- That repair has not been carried out or attempted by
other than authorized service staff.
- That only orignal accessories have been applied.
- That the product has not been exposed to abuse such
as knocks, bumps or frost.
- That only water without any impurities has been used.
- That the high pressure washer has not been used for
rental nor used commercially in any other way.
The following are not included in the warranty:
- parts subject to normal wear
CORRECT USE OF THE MACHINE
The performance of the machine are suitable for a
non-professional use. Structural technologies have
been studied to assure high reliability and safety
levels, and long life. It is absolutely forbidden to use
the machine in potentially explosive environments
or areas. The working temperature must range
between + 5° and + 50°C. The machine consists of
a motor pump protected by housing of shock resistant
material.
The machine is supplied with a lance with gun,
equipped with a handle to offer a practical working
position; the shapes and the dimensions of the
handle correspond to the safety normes in force. It
is forbidden to apply any protections or modifications
on the high-pressure lance or to the washing nozzles.
The water you use for the washer must not be dirty,
sandy or hold any corrosive chemical products, not
to compromise the good functioning and the long
life of the equipment. The machine is used for
washing rolling shutters, main doors, tiles, cars,
campers, etc., where water pressure is necessary
to remove dirt. With suitable optional accessories,
the machine can carry out, sand blastings and
UNPACKING
After opening the package, check the entire unit.
- In case of problems with this unit do not use it until you have consulted an authorized service/centre.
- Due to transport and packing dimension reasons, some accessories can be supplied disassembled;
in this case the fitting has to be carried out following the instructions on this booklet.
- All possible harmful parts of the package (plastic bags, foamed polystyrene, nails etc.) should be kept
out of children's reach.on ground and take the pallet off .
12
- the high-pressure tube
- accidental damage, caused by transport, neglect or
inadequate treatment, incorrect or improper use and
installation failing to comply with the indications in the
instruction manual.
- The warranty shall not cover any cleaning operations to
which the operative components may be subjected.
Repairs under this guarantee include replacement of
defective parts, exclusive of packing and postage/carriage.
The warranty shall not cover replacement of the machine
or extension of the guarantee resulting from a breakdown
.Repairs shall be carried out in our Authorized Technical
Assistance Center or in our plant. The machine shall reach
us carriage free, i.e. with transport expenses at the user's
charge. The manufacturer declines all responsibility for
damage to persons or property caused by bad installation
or incorrect use of the machine.
washings with the rotating brush, which has to be
connected to the lance.
The washer shall be placed on a safe and steady plane
and in horizontal position.
Whenever you use the high pressure washer, we suggest
to grip the gun in the right position, with one hand on the
handle and the other hand on the lance, as shown in the
picture fig. 2.
In case of operation indoors, adequate ventilation and
gas venting must be assured.
GB
fig. 2