Publicidad
Idiomas disponibles
Idiomas disponibles
5. Usage
Press the Lid-opener. The tilting lid opens. Fill the kettle with cold water and press
the lid down until it locks into place.
Note: A scale is provided on the outside. Do not fill the container above the maxi-
mum mark. The boiling water may spurt out if the kettle is overfilled. Then, place
the kettle on the base plate. Buttons for selecting various water temperatures are
provided on the base station. Press the button corresponding to the temperature
you desire. The button starts flashing. Press the "ON/OFF" button to start the boil-
ing function subsequently. As soon as the water reaches the set temperature, the
kettle switches off and you hear two beeps. Please note that short pauses may
occur during cooking processes below 100°C due to intermediate measurements.
Please wait until the cooking process is finished, which is confirmed by the beep
signal. The heating element switches off automatically and the boiling process is
stopped. The appliance can now be lifted and the water can be used.
5.1 "KEEP WARM"
The "KEEP WARM" function allows you to maintain a set temperature. To do this
press "KEEP WARM" and select a temperature. Please note that you can only se-
lect 70°C, 80°C or 90°C. Once the desired temperature is selected, press the "ON/
OFF" button. Following this, the kettle heat to the set value and maintains this
temperature for one hour. Press the "ON/OFF" button to interrupt this operation.
If you remove the kettle from the station during the keep-warm function, the
appliance is switched to the standby mode.
6. Descaling and cleaning
We recommend to descale the kettle at regular intervals depending upon the in-
tensity of use. Before cleaning, pull out the power plug and wait until the appliance
cools down completely. Please use only commercially available descaling agents
based on citric acid to descale the water container.
For the appropriate dosage, please refer to the specifications on the package or in-
sert of the descaling agent. The heating plate should not be specifically cleaned. Do
not use any hard objects on the heating plate. Use only a damp cloth for cleaning
the kettle externally. Do not use any abrasive items like wire brush or steel sponge
for cleaning. Never use any cleaning agents which may corrode the surface or pres-
ent a health risk if consumed! Never immerse the appliance, the power cable or
the plug in water or in any other liquid to prevent risk of electric shock.
23
English
Publicidad
