Proxxon FBS 240/E Manual De Instrucciones página 14

to the brush. The wire bristles can easily penetrate
light clothing and/or skin.
b) Allow brushes to run at operating speed for at
least one minute before using them. During this
time no one is to stand in front or in line with the
brush. Loose bristles or wires will be discharged
during the run-in time.
c) Direct the discharge of the spinning wire brush
away from you. Small particles and tiny wire frag-
ments may be discharged at high velocity during
the use of these brushes and may become imbed-
ded in your skin.
Protection class II device
Wear safety glasses!
Use indoors only
Please do not dispose off the machine!
Legend
1. Speed adjust button
2. Retainer
3. Connecting cable
4. ON/OFF switch
5. Lock button
6. Drill chuck
7. Drill upright mount
Scope of delivery
1 pc. FBS 240/E precision drill grinder
1 pc. Storage case
1 pc. Operating instructions
1 pc. Safety guidelines
1 pc. HSS spiral drill similar to DIN 338. Ø 0.3 - 0.5 -
0.8 - 1 - 1.2 - 1.5 - 2 - 2.5 - 3 - 3.2
1 pc. Round grinding pin Ø5mm
1 pc. Cylinder grinding pin Ø6mm
1 pc. Abrasive bands Ø 10mm
- 14 -
1 pc. Support for abrasive bands, shaft diameter Ø
3.2 mm
1 pcs. Sanding disc Ø 22mm (pink colour) of high-
grade corundum, for steel, cast iron, HSS steels
1 pc. Sanding disc Ø 22mm (grey), of silicon carbide.
For engraving and frosting of glass, ceramic
and stellites, also for grinding of metal, white
cast iron and high-alloy steels
1 pc. Polishing disc for acrylic glass and Plexiglas
1 pc. Brass brush for machining brass, brass alloys,
copper, precious metals, semi-precious stones,
plastic and wood. For cleaning electronic com-
ponents and printed circuit boards.
10 pcs. Corundum cutting discs for cutting alloyed and
non-alloyed steel, stainless steels and non-fer-
rous metals. Can also be used to cut wood and
plastic.
1 pc. Clamping arbour shaft diameter Ø 3.2 mm
Machine description
The PROXXON FBS 240/E precision bore grinder is de-
signed for grinding and boring operations too precise and
detailed for standard drills. The precision bore grinder is
ideal for working on steel, non-ferrous metal, glass,
wood, ceramics and more. Its applications include pre-
cision boring, grinding, polishing, brushing, derusting, en-
graving, enchasing, and disagreggating.
The quiet-running permanent-magnet motor provides
powerful torque over the entire speed range. The anti-
lash precision ball bearings of the drill spindle facilitate
optimal true-run turning. The spindle head is turned out
for easy mounting of PROXXON collet chucks (available
as accessory).
Technical data
Length:
Weight:
Chuck capacity:
Spindle collar:
approx. 200 mm
approx. 400 g
0.5 to 3.2 mm
Ø 20 mm