Xerox WorkCentre 7300 Serie Guía De Configuración Rápida página 27

3. When using the FTP protocol, enable the FTP client port.
a.
Select System Settings.
b. Touch Connectivity and Network Setup.
c.
Select Port Settings.
d.
From the Tools tab screen, select Network Settings, then Port Settings.
e. From the Port Settings screen, select FTP Client and then select Change
Settings.
f. Select Port Status and then select Change Settings.
g. Select Enabled then select Save.
h.
Select Close repeatedly until the Tools tab screen is displayed.
Copyright © 2008, Xerox Corporation. All rights reserved.
Scan to FTP/SMB (Optional)
27