MOB MO9239 Manual Del Usuario página 2

MO9239
EN
Weather Station with white LED
Instruction:

Features
Five function button (MODE, ALARM, SNZ/LIGHT, UP, DOWN)
Press MODE button Switch displaying: Time -> Temperature -> Night mode ON/OFF
Power consumption: 3 x AAA batteries (excluded) or USB charging cable (included)
When battery-on or connect to the power (USB) cable a BI sound heard with LED light on.
When battery-on, the LED light will turn off after 10 seconds without any operation.

Time setting
Under time mode, hold MODE button for 2 seconds will enter the time setting mode. The setting sequence: hour ->
minute -> 12HR/24HR
During the setting process, the setting article will flash.
Press "UP" once and ahead; hold for 2 seconds, go ahead at an 8 steps/ second speed.
Press "DOWN" once and back; press for 2 seconds, go back at an 8 steps/ second speed.
If choose 12HR format, it will have PM display in the afternoon, but there is no AM to show the morning time.
Press MODE button or without any operation within 10 seconds to confirm the setting to go back to the normal
display.

Alarm setting
Under time mode, hold Alarm button for 2 seconds the AL and hour will flash then enter the alarm time setting mode,
the setting sequence: hour -> minute -> snooze time (from 5-60 minutes)
During the setting process, the setting article will flash.
Press "UP" once and ahead; hold for 2 seconds, go ahead at an eight steps/ second speed.
Press "DOWN" once and back; press for 2 seconds, go back at an eight steps/ second speed.
During the setting process, the "AL" icon will flash.
Press ALARM button or without any operation within 10 seconds to confirm the setting to go back to the normal
display.
Under time mode, press on ALARM to activate/deactivate the alarm function.
When the alarm sounds, the buzzer lasts for 1 minute (BIBIBIBI).
Press SNZ/LIGHT button will stop alarm and active snooze function; the "AL" icon will flash until it reach to next alarm
time.
Press MODE, ALARM, UP and DOWN buttons to stop alarm. The "AL" icon on the display, it will alarm in the same
time next day.

Snooze Function
The default snooze interval time is 5 minutes.
Under alarm mode, press ALARM button 3 times will enter snooze interval setting interface. The "05" flash. Press
UP or DOWN button to set the interval time from 5-60 minutes.
Press "UP" once and ahead; hold for 2 seconds, go ahead at an 8 steps/ second speed.
Press "DOWN" once and back; press for 2 seconds, go back at an 8 steps/ second speed.
If only battery-on, press SNZ/LIGHT button, the LED light will light on for 5 seconds. The snooze function activated
with AL icon flash. The alarm will postpone 5 minutes.

Night Mode function
Night Mode means the LED auto lower the luminance during nighttime.
During the time interface, press MODE button 2 times will enter Night Mode interface.
The default night mode period is 18:00 to 6:00.
Press MODE button to turn on/off Night mode function.
Under the Night mode "ON" display, hold MODE button to enter Night Mode setting process. The setting
start hour -> start minute -> stop hour -> stop minute

Luminance level
Two luminance levels. The default is High level.
Press UP button to switch to Dimmer level.
Temperature display (0℃ ~ 50℃ in ℃ or ℉)
Under time mode, press MODE button to switch to temperature display. Press DOWN button to switch the
temperature display between ℃ /℉ unit.
Under temperature mode, hold MODE button until the BI sound heard. The LED will switch display: temperature (5
seconds) -> time (10 seconds) -> repeat.
Hold MODE button again until the BI sound heard, it would back to time mode.
sequence: