Usb Driver Installation (Windows 7); Usb Driver Installation (Windows 8) - Nonin WristOx2 Manual Del Operador

nVISION Software

USB Driver Installation (Windows 7)

1. The USB driver software is on the Model 3150 Operator's Manual CD. Insert the CD into
the PC's CD/DVD drive.
2. Connect the Model 31501SC USB cable to the sensor port on the Model 3150 and a USB
port on the PC.
3. Open the Device Manager by clicking Start / Control Panel / System and then selecting
Device Manager.
4. Expand Other devices.
5. Right click Model 3150 and select Update Driver Software...
6. Update Driver Software - Model 3150 window opens. Choose Browse my computer for
driver software.
7. Browse to the USB Driver folder on the Operator's Manual CD and click OK.
8. Click Next.
9. In the Windows Security pop-up window, select Install this driver software anyway.
10. Driver software installs. When Windows has successfully updated the driver software,
click Close.
11. In the Device Manager window, look up the communications (comm or COM) port for the
device. Expand Ports (COM & LPT). One port should say "Nonin Model 3150 (COM#)."
Make a note of the COM#. It is needed to set up the Model 3150 with nVISION software.

USB Driver Installation (Windows 8)

1. The USB driver software is on the Model 3150 Operator's Manual CD. Insert the CD into
the PC's CD/DVD drive.
2. Connect the Model 3150SC USB cable to the sensor port on the Model 3150 and a USB
port on the PC.
3. Open the Device Manager by right clicking in the bottom left corner of the screen and then
click Device Manager. Device Manager window opens.
4. If needed, expand Other devices.
5. Right click Model 3150 and select Update Driver Software...
6. Update Driver Software - Model 3150 window opens. Choose Browse my computer for
driver software.
7. Browse to the USB Driver folder on the Operator's Manual CD and click Next. Verify that
"Include subfolders" is checked.
8. In the Windows Security pop-up window, check "Always trust software from Nonin
Medical, Inc." and then click Install.
9. Driver software installs. When Windows has successfully updated the driver software,
click Close.
10. In the Device Manager window, look up the communications (comm or COM) port for the
device. Expand Ports (COM & LPT). One port should say "Nonin Model 3150 (COM#)."
Make a note of the COM#. It is needed to set up the Model 3150 with nVISION software.
31