BMC TRAILFOX Manual página 3

CABLE ROUTING / REPLACING CABLE HOUSING
1
Remove the cable clamps at head tube and
down tube.
2
When replacing cable housings we recom-
mend leaving the cables in place so they can
guide the new housing.
3
Pull the cable housing out of the frame towards
the bottom bracket.
4
Your bike comes fitted with foam tubes around
the cable housing to avoid rattling. Remove
those foam tubes through the opening under
the down tube.
5
Slide the foam tube over the new cable
housing.
6
Insert the cable that you left inside the frame
into the housing to guide it.
BMC Switzerland AG
Sportstrasse 49
CH-2540 Grenchen
Phone +41 32 654 14 54
Fax +41 32 654 14 55
info@bmc-switzerland.com
www.bmc-switzerland.com