BMC TRAILFOX Manual página 4

7
Push the housing and foam tube through
the opening under the down tube up to the
opening at the head tube.
8
Make sure the housing exits at the right
position.
9
Re-install cable clamps.
CHAINCATCHER INSTALLATION
1 Your bike is equipped with a chaincatcher
that is mounted to the ISCG mounts.
2 For optimal function we recommend to use
spacers between frame and chaincatcher
as described below:
Crank
XTR
XT+SLX
XX1
FD ADJUSTMENT
1
We recommend to install the FD as low as
possible.
2 For optimal function with the XTR FC-M980
crank we recommend using the triple position
at the shifter and blocking the big ring with the
limit adjust screw at the front derailleur.
BMC Switzerland AG
Sportstrasse 49
CH-2540 Grenchen
Phone +41 32 654 14 54
Fax +41 32 654 14 55
info@bmc-switzerland.com
www.bmc-switzerland.com
Spacer
2 mm
2 mm
6 mm