Operating Mode; Decimal Point; Technical Data - Eaton E5496E040x Serie Instrucciones De Puesta En Servicio

3.4 Operating mode

*0, 0.1, 0.01, 0.001 means: time measurement in
0, 0.1, 0.01, 0.001 time units

3.5 Decimal point

3.6 SET/RESET mode
MN05401012E
Time unit: seconds (reso-
lution depending on posi-
tion of the decimal point*)
Time unit: minutes (reso-
lution depending on posi-
tion of the decimal point*)
Time unit: hours (resolu-
tion depending on position
of the decimal point*)
Time units:
Hours:Minutes:Seconds
(decimal point setting is
ignored)
The decimal point defines
the resolution of the pro -
gram med time unit.
0 1
0.0 1/10 (0.1)
0.00 1/100 (0.01)
0.000 1/1000 (0.001)
manual reset via the red
SET/RESET key and
electrical reset via the
SET/RESET input
no reset (red SET/RESET
key and SET/RESET
input locked)
only electrical reset via
the SET/RESET input
only manual reset via the
red SET/RESET key
www.comoso.com
3.7 SET value
3.8 End of programming

4. Technical data

Supply voltage
AC power supply:
DC power supply:
Display:
Data retention:
Polarity of the inputs:
Input resistance:
The device will be set to
the set point by pressing
the red SET/RESET key
or activating the
SET/RESET input.
SET value 0 – 999 999 or
99.59.59 (number of deci-
mal places depends on
the decimal point option)
The programming routine
is repeated once more.
The values set until now
can be checked and mod-
ified.
The programming routine
will be exited and all
values set will be stored
as new parameters.
Afterwards the device is
ready for operation.
90 – 260V AC/max. 6 VA
10 – 30V DC/max. 50 mA
with inverse-polarity protection
6 digits, red 7 segment
LED display, height 14 mm
[0.55 in.]
EEPROM
Programmable, npn or pnp
(sinking or sourcing) for all
inputs
appr. 5 kOhm
7