Light Square Arrangement Options; How To Correctly Mount Your Light Squares - Nanoleaf Canvas Manual Del Usario

1.2 Light Square Arrangement Options

Light Squares are joined together by inserting the linkers into linker slots along the side. The Light Squares' linker
slots have been designed with an offset approach, allowing you to create visually interesting designs using linear
and/or staggered arrangements during mounting.
LINEAR ARRANGEMENT

1.3 How to Correctly Mount Your Light Squares

Using the mounting tape correctly is critical for keeping your Nanoleaf Canvas Light Squares properly attached to the wall.
Only mount the Light Squares to
1
flat, smooth surfaces. Avoid using
the mounting tape on surfaces
like unfinished wood, brick,
stucco, or wallpaper.
2
Clean the wall with a damp cloth to
remove dust and dirt. Let dry
before mounting the Light Squares.
Nanoleaf Canvas User Manual | Light Square Arrangement
3
4
WALL
STAGGERED ARRANGEMENT
Attach 3 pieces of mounting
tape to the back of each Light
Square, spaced evenly.
Begin by mounting one Light
Square to the wall, and plug in the
power supply so that the Light
Square is lit up. This will make it
easier to ensure that each
subsequent Light Square has a
good connection to the system.
5
WALL
30s
When mounting each Light Square,
firmly press and hold the Light
Square to the wall for 30 seconds.
This helps the adhesive create a
strong bond.
6
Mount the Light Squares to the
wall one at a time. If you create
the entire design beforehand and
attempt to mount it to the wall all
at once, the linkers will break.
04