Nanoleaf Smarter Series App; Download The App; Pairing Your Canvas; Layout Assistant - Nanoleaf Canvas Manual Del Usario

2. Nanoleaf Smarter Series App

2.1 Download the App

Nanoleaf Smarter Series App
Open the Nanoleaf App when you are ready to pair to
your Nanoleaf Canvas. The in-app tutorial will walk you
through the basics of how to set up your system.

2.2 Pairing your Canvas

On iOS, you must configure your Canvas on WiFi within 15 minutes of connecting it to power. This setup mode is indicated by the
Power LED (section 1.6). If the device has been on for more than 15 minutes and the Power LED has turned off, you can simply
disconnect the Control Square from power to reset the timer. If the Power LED still does not come on, try the troubleshooting
methods in section 3.

2.3 Layout Assistant

The Layout Assistant is a key component of the setup process. This feature is designed to allow you to preview your layout in the
app, and then see it in any room using your smartphone's camera.

2.4 Nanoleaf App Explore Tab

The Explore tab provides helpful information
about the app including tutorials, product
feature overviews, and news. You can find it
using the icon shown above.
Nanoleaf Canvas User Manual | Nanoleaf Smarter Series App
iOS App | Open App > More > Layout Assistant
*on the lower menu bar
Android App | Open App > Side Menu > Layout Assistant
*swipe left or tap the hamburger menu icon at the top left to open this menu
AR Layout Assistant
Tap on this button to activate Augmented Reality mode and preview your layout using the
smartphone's camera. Android users: Use the QR code as a target for Augmented Reality mode.
PS, when it comes to QR codes, size matters
or when printing at home make sure to set print size to "Do Not Scale".
Available on
. Either use the QR code that is printed on the box
07