If You Have Forgotten Your Pin Code; How To Service Without Pin-Code - Bang & Olufsen BeoSound 1 2581 Guia De Reparación Para El Usuario

2.4 Brief operation guide, English

If you have forgotten your PIN code

Enter the Master code

How to Service without PIN-code

Service code 11111
If you have forgotten your PIN code, you must contact a retailer who then requests
a fi ve-digit Master code from Bang & Olufsen. Once the code is keyed in, the
BeoSound 1 is operational again and the PIN code system is deactivated.
The cue PIN is displayed shortly.
The display changes to four squares.
l
Press for 3 seconds to open for Master code input.
The squares changes to underscores and the fi rst digit is shown in the display.
Then the display changes to two rows of lines. Press
digits.
Press STORE to accept the displayed digit and proceed to the next.
The digit is replaced by a square and the next underscore will blink.
Press STORE to accept the fourth digit when it is displayed.
The display changes and a fi fth digit can be entered.
Enter the fi fth digit and press STORE.
"dEL" appears in the display indicating that the PIN code system is deactivated.
If the PIN-code is activated and the product is in a service situation, there is a
possibility of 12 hours service by entering a 5 digit Service code which is 11111.
This gives 12 hours of full functionality to service the product and make module
changes without naming/register the exchanged modules to the Customers
product. The 12 hours is only running when the product is connected to mains !
If the customers PIN-code or Master-code is entered the exchanged modules will
be named/registered to the product. Registration of the modules cannot be
changed.
The service code must be entered when a source is selected and the product asks
for the PIN-code "PIN _ _ _ _".
The display changes to four squares.
l
Press for 3 seconds to open for Service code input.
The squares changes to underscores and the fi rst digit is shown in the display.
Then the display changes to two rows of lines. Press
digits.
Press STORE to accept the displayed digit and proceed to the next.
The digit is replaced by a square and the next underscore will blink.
Press STORE to accept the fourth digit when it is displayed.
The display changes and a fi fth digit can be entered.
Enter the fi fth digit and press STORE.
"dEL" appears in the display indicating that the PIN code system is deactivated
l n
or repeatedly to reveal
l n
or repeatedly to reveal