Cleaning - Vornado NGT335 Guia Del Propietario

CLEANING

Because your tower moves a substantial
amount of air, it will need regular cleaning.
If service is required, return your tower to
Vornado (see WARRANTY for instructions).
WARNING: To reduce the risk of electrical
shock and injury to persons, unplug the
tower before cleaning.
REGULAR CLEANING
1. Unplug tower before cleaning.
2. Use the brush attachment on your
household vacuum cleaner to vacuum
any accumulated dust off the tower.
3. Wipe down the entire tower with a
soft cloth.
Note: Do not use gasoline, thinners, solvents
or other chemicals for cleaning. The motor
is permanently lubricated and requires
no oiling.
INTENSIVE CLEANING
AIR INLET GRILL REMOVAL
Screwdriver required.
You may remove the Air Inlet Grill to vacuum
any dust off the fan blade by following these
instructions:
1. Unplug tower before cleaning.
Screws
2. Use a Phillips screwdriver to loosen the 4
screws located along front edge of grill.
3. Rotate front edge of grill backward until
grill is removed.
4. Use the brush attachment on vacuum
cleaner to remove any accumulated dust
off the fan blade.
5. Replace Air Inlet Grill and tighten screws.
English
13