Description Of The Appliance; Switching On The Appliance - ARIETE Duetto 6437/B Manual Del Usuario

DEscriptiON Of thE appliaNcE

A - Power cord
B - Tank
C - Tank cover
D - Iron support grid
E - Appliance carrying handle
F - Measuring cup
G - Spray nozzle
H - Tank filler cover
I - Spray button
J - Continuous steam lock slider
K - Steam button
L - Temperature adjustment knob
M - Tank of the iron
iNstructiONs fOr usE
Warning!
Remove any labels and protections from the soleplate before using the appliance for the first time.
The iron disconnection from the tank must occur always and only with the power plug unplugged from the outlet.
Duetto can be used in two ways: as ironing system or as a traditional iron.
The ironing system mode is recommended for large quantities of cloths and long ironing times, while for lesser quantities or
less ironing time it is recommended to use the traditional ironing mode.
To use it as ironing system make sure that the iron/boiler connecting cable (P) and the power cord (A) are inserted in
the connection on the cord storage compartment (X) at the base of the appliance (Fig. 3). See "Using the iron an ironing
system".
For use in traditional iron mode, unplug the power cord (A) and the iron/boiler connecting cable (P) from the connections on
the cord storage compartment (X) by pressing the release hook (Q). Connect the cables to each other (Fig. 6) until you hear
a slight click. See "Using as traditional iron".
To return using the ironing system mode, unplug the power cord (A) and the iron/boiler connecting cable (P), by pressing the
release hook (Q). Insert the two cables in the connections on the cord storage compartment (X) at the base of the appliance
until you hear a slight click.
usiNg thE irON as irONiNg systEM (fig. 2)
filling the tank before use
Warning!
Make sure the unit has been disconnected from the mains supply before filling the tank (B) with water.
Before plugging it in, completely unwind the power cord. Rotate the tank lid (C). Fill the tank with cool tap water (Fig. 7).
neVeR fill the tank beyond the MaX level.
The appliance works with regular tap water. If the tap water is particularly hard (higher than 20°F), use a mixture of 50%
tap water and 50% demineralized water.
never use pure demineralized water.
do not add any additives or chemicals (such as for example, amides, starches, perfume or other); otherwise, the
warranty may be revoked.
Warning!
To avoid damaging the pump, never operate the appliance without any water in the tank, even for dry ironing.
Close the tank lid (C).

switching on the appliance

Place the appliance on a horizontal and stable surface. The power cord (A) and the iron/boiler connecting cable (P) are cou-
pled to the connections on the cord storage compartment (X) (Fig. 3). Connect the appliance to the power supply, ensuring
that the voltage indicated on the identification plate corresponds to your local power supply.
Before you turn on the appliance, make sure there is sufficient water inside the tank.
6
N - Iron temperature control indicator light
O - Soleplate
P - Iron/boiler connecting cable
Q - Cables release hook
R - Steam ready light
S - Boiler on-off switch
T - Steam adjustment knob
U - Iron on-off switch
V - Tank cleaning cap
W - Tank cleaning cap door
X - Cable compartment
Y - Cord storage device