Description Of The Appliance - ARIETE 6408/8 Manual De Instrucciones

• Before leaving the iron unattended, even for a short time, turn off the appliance, always unplug it and place it on support
base (D).
• Pressing the steam button before the boiler has reached the optimum temperature or the iron has heated up may cause
water to leak from the steam holes.
• Do not use the appliance if the power cord appears to be damaged, with parts bearing burns, etc.; an authorised Ariete
service centre must repair and replace the power cable; under penalty of the warranty being forfeited.
• Never try to iron garments being worn.
• Do not touch the metal parts of the iron when in operation and for several minutes after it is turned off since it could cause
burns.
• Do not aim the jet of steam towards parts of the body or pets.
Place the appliance on a stable surface where it can not tip
•
over.
• remove any labels and protections from the soleplate before using the appliance for the first time.
• Always unwind the power cord before use.
• using the appliance with no water in the tank may damage the pump.
• Do not use sparkling (carbonated) water. If your water supply is very hard, we suggest you use demineralised water instead.
• When the iron is hot, do not rest it onto the connecting cable or the power cord. Take special care in ensuring that the cable
and the cord do not come into contact with the soleplate when it is hot.
• Do not pull the power cord to unplug the appliance.
• The appliance must only be cleaned with a soft, slightly damped, cloth after unplugging the iron and allowing all its parts
to cool down. Never use solvents which may damage the plastic parts.
• Clean the boiler at least every two months so as to eliminate any residue of lime that could jeopardize proper
operation of the appliance. remember to put 400 cc of water back into the boiler before replacing the cap.
• Do not pour vinegar, descalers or other scented substances into the tank; Otherwise, the warranty may be revoked.
• Do not wrap the power cord around the soleplate when the iron is hot.
• Do not put the soleplate in contact with metal surfaces.
• Before storing the unit, switch it off by turning the ON/OFF switch (J) to (o). Always unplug the power cord from the socket.
Wait for it to cool down and completely empty the tank.
• Do not expose the appliance to atmospheric agents (rain, sun, etc.).
sAve These InsTrucTIOns fOr fuTure reference.
•

DescrIpTIOn Of The ApplIAnce

A - Support for iron-boiler connection cable
B - Boiler
C - Soleplate
D - Iron support grid
E - Continous steam button
F - Steam button
G - Thermostat knob
H - Iron temperature control indicator light
I - Iron/boiler connection cable
J - ON switch and operating mode setting
o: off
ECO: up to 30% of energy consumption saving
MAX: maximum steam pressure
K - ECO indicator light (
L - Steam adjustment knob
M - Steam ready indicator light (
N - Power cord
O - Tank
P - Boiler cleaning safety cap
Warning of burns
Warning – material damage
)
)
13