Configure - Dentsply Sirona CEREC MC Manual Del Operador

3 Configure

Dentsply Sirona
Supplement to the Operating Instructions, Barcode Reader
3
Configure
Configuring devices
You can change various settings later on via the "Configure" button in
the "Configure Devices" dialog.
Bar code reader
If a bar code reader is used, the corresponding box must be activated.
The bar code reader will then always be used to read a bar code, even
when the scanner is also active. The scanning function can, however,
still be used in this case.
63 22 346 D3439
6
D3439.201.05.04.02 04.2019