Initial Setup; Connecting To The Mains; Connecting A Computer - Gigaset T640 PRO Instalación

Initial setup

Rear panel
1
1 USB ports for connecting computer peripherals
(e.g. mouse and keyboard)
2 VGA port for connecting a monitor
3 Gigabit Ethernet LAN ports (currently not in use)
Initial setup
Before setting up your device, read the safety precautions and the notes on
installation location in the manufacturers' notes.
Procedure:
¤
Connect the PBX to the mains
¤
Go through the basic configuration with the Setup assistant, including configuring the net-
work settings and the outside line.
¤
Set up the PBX in its intended place of use or install it in a 19-inch rack.
¤
Establish connections with the local network and, if applicable, with the telephone network
(VoIP, ISDN, FXO).
¤
Connect phones.

Connecting to the mains

Connecting a computer

2
2 3
Connect the computer.
4 Screw for earthing cable
5 Power supply connector
6 250 V fuse
Only use the supplied power cable.
¤
Connect the device to the mains.
As soon as the device is connected to the
mains, the system starts up and the
POWER LED on the front lights up.
Cable: straight-through Ethernet cable
(not supplied)
¤
Connect the LAN port directly to the
network interface of the computer.
4 5 6