Gigaset T640 PRO Instalación página 7

Installation
Installing in a server rack
Mounting width: 19", height: 1 HU.
1
2
Installing without a server rack
If you are not installing the PBX in a server rack:
¤
Attach the supplied self-adhesive rubber nubs to the underside of the chassis to position the
device securely on a desktop.
Attaching the earthing cable
1 2
¤
Attach the mounting brackets on
both sides of the device chassis
using the supplied screws.
¤
Place the device on a pre-installed
shelf in the rack.
¤
Attach the ends of the brackets
the vertical tracks of the rack frame
2
using standard 19-inch rack bolts
(not supplied).
Earthing cable: min. 1.5 A/mm
(not supplied)
¤
Remove the earthing screw
the rear of the device.
¤
Attach the earthing cable
the earthing screw. Connect the
other end of the cable to a protective
earthing conductor.
Installation
1
to
2
on the
1
using
2
5