Descargar Imprimir esta página

Attaching The Backrest - Diono Monterey 2 Manual Del Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21

Attaching the backrest

1) Lay backrest on flat surface with front facing down. (Fig 2.1)
2) Hold seat bottom facing down. Align seat bottom pivot bar at 90º angle with backrest
hooks. Push in to attach seat bottom to backrest. (Fig. 2.2)
3) Rotate seat bottom downwards and under backrest until a 'click' is heard and the seat
shape is formed. (Fig. 2.3)
4) Fasten screws tightly for permanent attachment. (Fig.2A)
REMOVING THE BACKREST
Follow above instructions in reverse.
ADJUSTING THE HEADREST
Squeeze the red adjuster on back of booster seat headrest while adjusting its height up
or down to fit the child. (Fig.6)
ADJUSTING BACKREST WIDTH
This booster seat features a unique, width-adjusting seat back to best fit a growing child
as well as seasonal clothing.
Turn the dial on the back of the backrest (Fig. 7) to adjust its width: turn clockwise (Fig.
7.1) to increase backrest width (Fig7.2); turn counter-clockwise to make backrest
narrower.
Suggestion: It may be easier to adjust backrest to proper width prior to securing the booster
seat installation using ISOFAST.
ISOFAST installation
To improve safety and performance, this booster seat is equipped with a unique ISOFAST
system that allows easy attachment to a vehicle's lower anchor locations.
WARNING:
Unsecured objects can become flying hazards and can cause serious injury in
an accident. Sunshine Kids always recommends utilizing ISOFAST installation in vehicles
equipped with lower anchors.
Disengage ISOFAST connectors from storage slots and lay booster seat on its side.
1) While depressing the cam lock lever (Fig. 3.1), pull ISOFAST connectors away from the
booster seat and extend both straps all the way. (Fig 3.2)
2) Attach both ISOFAST connectors to the vehicle (Fig. 4.1) starting with the connector that
is furthest from you. For ease of use, make sure open end of hooks face upward during
use.
3) While pushing booster against vehicle seat (Fig. 4.3), pull one adjuster strap tight (Fig.
4.2) and then the other.
16

Publicidad

loading

Este manual también es adecuado para:

15000Monterey2