SECURING THE CHILD
1.
Place booster seat on vehicle seat so it is resting firmly on
vehicle seat bottom and touching the vehicle seat back.
2.
Properly position child: sitting upright and all the way back in
the booster seat.
3.
Fasten seat belt across child.
4.
Tighten the seat belt by pulling the diagonal shoulder belt
portion in the direction of the arrows. Make sure seat belt is
not twisted and lays flat across child's hips, torso and shoulder.
IMPORTANT:
Diagonal seat belt portion should route inside the
red lower belt guide closest to the buckle and over child's
shoulder. It should NOT be touching the neck.
If the diagonal seat belt portion does not correctly fit the child,
then shoulder belt guide must be used.
NEVER
position the shoulder belt loosely or under the child's arm or behind their back.
ALWAYS
make sure the shoulder belt is positioned underneath the booster seat armrest.
12
solana
PROPER BUCKLE POSITION
IMPORTANT:
After booster seat is installed and seat belt is fastened around child, it is
important to confirm correct seat belt buckle position to ensure secure installation.
CORRECT SEAT BUCKLE POSITION
Buckle is on the outside of lower belt
guide.
SECURING THE CHILD
INCORRECT SEAT BUCKLE POSITION
If buckle is being pulled across the lower
belt guide and into the seat, choose
another seating position within the vehicle.
diono.com
13