Maintenance; General; Fabric Cover; Checklist - Maxi-Cosi Rodi XR Modo De Empleo / Garantía

Ocultar thumbs Ver también para Rodi XR:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
EXI0212_GBA_Rodi_I_BW:--

4. MAINTENANCE

4.1 General

Remove the Maxi-Cosi Rodi XR from the car before cleaning.
• The car seat can be cleaned using lukewarm water and soap. Do not use aggressive cleaners like
abrasives or thinner.
• The cover should be washed by hand at a maximum temperature of 30º C. Do not put it in the dryer (also
see washing instructions).
• It is advisable to buy an extra cover when purchasing the Maxi-Cosi Rodi XR so that you can continue
using the car seat when the cover is being washed.
Removing the cover
• Remove the Maxi-Cosi Rodi XR from the car.
• Disassemble the backrest and headrest as described under "Attaching and removing the backrest with the
seat".

4.2 Fabric cover

Removing the cover from the booster seat
• Remove the cover from the hooks on the bottom (14,1) and top (14,2).
14
• Pull the cover out from under the rim of the plastic belt guides (14,3) and then pull it forward from the
14
back across the armrests (14,4).
• The cover should now be fully removed from the booster seat.
Removing the cover from the backrest
• Undo the elastic strap behind the backrest (15,1).
15
• Remove the cover from the hooks on the back (15,2).
15
• Pull the cover over the lumbar supports (16,1). Make sure the foam parts remain in place.
16
• Remove the cover from the hooks on the inside of the backrest (16,2).
16
• Remove the cover from the hooks at the bottom of the lumbar supports (16,3).
16
Removing the cover from the headrest
• Undo the elastic strap behind the headrest (17,1).
17
• Remove the cover from the hooks on the back (17,2).
17
• Remove the cover from the headrest (18,1) and from behind the red belt hooks (18,2). Make sure the
18
foam part remains in place.
18
• Remove the elastic strap from behind the hooks at the bottom of the backrest (18,3).
To refit the cover, follow these instructions in reverse order. Make sure the cover is fastened securely
behind the hooks and behind both the red belt hooks on the headrest (17,2) and the red belt guides in the
17
booster seat (14,3), so that the car seat belt can be threaded through them.
14

5. CHECKLIST

Follow this list before every trip!
• Check to make sure the Maxi-Cosi Rodi XR is installed properly in the car.
• Check to make sure the child is buckled up correctly and tightly and that the shoulder belt is at the correct
12
height (12) (the tighter the belt around the child, the better protected the child).
• Check to make sure both the lap belt and shoulder belt are threaded through the red belt guides under the
armrests.
• Check to make sure the shoulder belt is fitted in front of the child and not behind his back.
• Check to make sure both shoulder supports are adjusted to the same, correct position.
09-12-2008
11:36
Instructions for use
Pagina 11
GB
11

Publicidad

Tabla de contenido
loading

Tabla de contenido