Maintenance And Storage; Cleaning - Nosiboo Pro Manual Del Usuario

Ocultar thumbs Ver también para Pro:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
Warranty tasks
The distributor of the Nosiboo Pro device is obliged to promptly handle customer complaints based on the aspects included in the
chapters Troubleshooting guide and Malfunction management guide of the User manual. The distributor of the device is obliged
to keep a written record about the troubleshooting. This can be done within the framework of the distributor's internal documen-
tations or in the warranty card supplied with the User manual. It has to contain the detected malfunction, the date and the unique
serial number to be found on the label on the bottom of the device.
Specialist service station contact details
Attract Kft.
H-7622 Pécs, Siklósi út 1/1 - Hungary
Tel.: +36 72 551 642 (Mo-Fr: 8 am – 4 pm)
E-mail: customerservice@nosiboo.com

6. Maintenance and storage

EN
Only after the cooling process has stopped should the power cord be unplugged from the mains and from the device! Disconnect the
tube from the device and the Colibri head. There is an air mesh behind the connecting unit which prevents solid objects and dust from
entering the device. In the event of an unexpected drop in performance, it is recommended that you check the air mesh. If the air
mesh is dirty or clogged, replace it with a spare air mesh. (A list of spare parts can be found in the "Accessories, spare parts" section.)
Figure 1 – Replacing the air mesh
Clean the housing with a dry, soft cloth; do not use any detergents or chemicals!
Keep the device in a closed space where it is protected from dust and damage (e.g. in a cabinet).
If you have more children, we recommended to use a separate Colibri head for each child and to store the Colibri heads separated.
Do not store near a heat source!

7. Cleaning

1. Remove the tube and the nose tip, then take apart the head housing.
2. Wash the collared tube, the nose tip, and the head housing in lukewarm water and dishwashing detergent and let them dry.
Figure 4 – Cleaning of the Colibri head
3. Clean the device housing with a dry, soft cloth; do not use any liquids, detergents or chemicals.
4. Wipe the tube with a cloth if necessary. Don't wash the tube.
User manual * DMR-07/A05/1/V10 * 01. 03. 2021 * Nosiboo Pro * Page: 15/128

Publicidad

Tabla de contenido
loading

Productos relacionados para Nosiboo Pro

Tabla de contenido