Temperature Display; Starting Up And Temperature Regulation - AEG Santo 70338 WK Manual De Instrucciones

DESIRED temperature means:
The temperature that has been selected for inside the compartment. The
DESIRED temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the com-
partment.. The ACTUAL temperature is indicated with illuminated numbers.

Temperature display

The temperature display can indicate several pieces of information.
• During normal operation, the temperature currently present in the com-
partment. (ACTUAL temperature) is displayed.
• When the temperature is being adjusted a flashing display indicates the
compartment temperature currently set (DESIRED temperature).
Starting Up - Setting the Temperature
1. Plug the mains plug into the mains socket.
2. If the display is OFF press ON/OFF button. The green mains pilot indicator
illuminates. The appliances start.
3. Press either the "C" (+) / "C" (-) or "E" (+) / "E" (-) buttons. The temperature
display switches over and the DESIRED temperature currently set flashes on
the temperature display.
4. Set the required temperature by pressing the "C" (+) / "C" (-) or "E" (+) / "E"
(-) buttons (see section "Temperature setting buttons"). The temperature
display will immediately show the changed setting. Each time the button is
pressed the temperature is adjusted by 1 °C.
5. Once the required temperature has been set, after a short period (approx. 5
sec.) the temperature display will change and again indicate the current
ACTUAL temperature inside the fridge. The display will change from flashing
to continuous illumination.
30
All manuals and user guides at all-guides.com