EGO HT2400 Manual De Instrucciones página 28

PROBLEM
Excessive vibration or noise.
28
56V LiThiUM-iOn cORdLEss hEdgE TRiMMER
cAUsE
1. dry or corroded blades.
2. Blades or blade support
is bent.
3. Bent or damaged teeth.
4. Loose blade bolts.
sOLUTiOn
1. Lubricate the blades,
following the section
"LUBRicATing ThE
BLAdE" found on page 25
in this manual.
2. Replace with a new blade
or support. contact EgO
service center for blade
or support replacement
service, found on page 30.
3. Replace with a new blade.
contact EgO service cen-
ter for blade replacement
service, found on page 30.
4. Tighten the blade bolts.
Using a 5/16" wrench,
turn the bolt clockwise
to tighten.