Installation - Lightway SP-2016PIRB Manual Del Usuario

Installation

Before installing the Outdoor Security Light, please read all these instructions
carefully and save them for future reference. Basic safety precautions should
always be followed. PLEASE READ AND SAVE ALL INSTRUCTIONS BEFORE
INSTALLING AND USING THE OUTDOOR SECURITY LIGHT.
NOTE: Installation must be performed by a qualified electrician or a person who
is informed about the standards and technical requirements of the appliance
and its proper installation.
WARNING: Before commencing installation or maintenance, the electricity
supply MUST be turned off at the circuit breaker box or fuse. DO NOT rely on
wall switch alone to turn off power.
Estimated installation time: 30 minutes
See diagram below to help with installation of the security light.
Tools required (not included); 1 Phillips head screwdriver and 1 flathead
1.
screwdriver and silicone weather sealant.
Before assembling and attempting installation, make sure all parts are
2.
available. Check the parts list with the packaging contents.
Locate the 2 cover mounting bracket screws (F) and insert the screws onto the
3.
outside holes on the back of the mounting bracket. Tighten securely.
6
Installation