Setting For Digital Output (Digital Output) - Pioneer DVH-P7000R Manual De Operación

Initial Settings for
DVD player
3 Move the joystick up/down to select angle
mark display .
ON/OFF
The currently set option is indicated the mark
" ". The option selected with the joystick is
indicated in blue.
4 Click the joystick.
Angle mark display is set ON/OFF.
Notes
• You can also switch the angle during playback
with . (Refer to page 33.)
ANGLE
• Pressing takes you back to the previ-
RETURN
ous display.
Setting for digital output
(DIGITAL OUTPUT)
Set digital output correctly to match the compo-
nents you are using with this unit. There is no
need to change settings if this unit is not con-
nected for digital output.
Precaution
• Incorrect setting may result in noise and dam-
age to speakers so be sure to read the manu-
als of the connected components.
1 Move the joystick up/down to select
in the second
DIGITAL OUTPUT
is indicated in blue.
DIGITAL OUTPUT
2 Click the joystick.
Digital output setting menu is displayed.
3 Move the joystick up/down to select the
desired digital output setting.
The currently set digital output setting is indi-
cated the mark " ". The digital output setting
selected with the joystick is indicated in blue.
Digital output
Dolby D/LPCM
LPCM
4 Click the joystick.
The selected digital output setting is set.
• Linear PCM output of DTS audio is not possi-
• When using this unit with a Pioneer Multi-
• Pressing
.
SET UP MENU
Setting detail
Select when using a Dolby
Digital compatible amp and
decoder. The Dolby Digital
signal is output as it is. (Initial
setting)
Select when using an amp and
decoder that are not Dolby
Digital compatible. The Dolby
Digital signal is converted to
and output as a linear PCM
signal.
Notes
ble. If you select
LPCM
put.
channel processor with digital input (DEQ-
P7000), select
Dolby D/LPCM
takes you back to the previ-
RETURN
ous display.
, DTS audio is not out-
.
En
Section
10
75