Setting The Time; Setting The Fm Tuning Step - Pioneer DVH-P7000R Manual De Operación

Initial Settings

Setting the time

This is used to set the time on the unit's clock
display.
1 Press to select the
F
Press until the time appears in the display.
F
• Pressing
FUNCTION
performs the same operation.
2 Select the portion of the time display you
wish to set with 1 or ¡.
Pressing 1 or ¡ will select a portion of the
clock display:
—
HOUR MINUTE
As you select portions of the clock display the
portion selected will blink.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
3 Select the correct time with E or e.
Pressing E will increase the selected hour or
minute. Pressing e will decrease the selected
hour or minute.
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
.
CLOCK
on the head unit also

Setting the FM tuning step

Normally the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA is on the tuning
step automatically changes to 100 kHz. It may
be preferable to set the tuning step to 50 kHz
when AF is on.
1 Press to select
F FM
Press repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
tuning step with 1 or ¡.
2 Select the
FM
Pressing 1 or ¡ will switch the FM tuning
step between 50 kHz and 100 kHz while AF or TA
is on. The selected FM tuning step will appear in
the display.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
Note
• The tuning step remains at 50 kHz during
manual tuning.
.
appears in the
FM Step
on the head unit also
En
Section
11
79