Auta COMPACT VISUALTECH Manual De Instrucciones página 18

The picture below shows the navigator of the SB and all the possible functions attached
to each of its five keys.
 Back / Exit / Consult / Direct
entry to main menu
1. Communication with Tenants.
1.1. From the SB to the Tenants:
The SB can initiate the call to a flat using two different ways: Introducing a call
code or navigating through the Queue. If it is a video installation, the tenant will get
image of the auxiliary camera of the SB (if it is enabled) in his Monitor. The ringtone
from the SB is different (monotone).
Entering a Call Code:

Simply enter a numeric code and then press OK. This operation can be performed
either with the handset picked up or hanged up. Valid codes: 1 to 254 for internal
panel and 1 to 6399 for external panel.

If the key  (Exit) is pressed at any moment, the entry of numeric codes will be
cancelled.
Navigating through the queue:

From the stand by mode, if the key  is pressed the system grants access directly to
the Queue database. Another way to proceed would be by pressing any of the
central keys of the navigator (, OK, ) to enter the main menu, and then select
the "Queue" option pressing OK.

Once we are in the Queue database, the vertical arrows ,  can be used to
navigate looking for the suitable register. When found, pressing OK will perform
the call.

If the Queue is empty, a message will appear on the screen (Empty Queue). Check
in the section 3.2 for further information.

The key  (Exit) can be pressed at any moment to cancel the navigation.
 Cursor Up / Direct entry to
Queue.
 Cursor Down / Direct entry
to Mode.
17
VISUALTECH SWITCHBOARD
User Guide
 Erase queued calls / Pass to /
Direct entry to main menu
 Accept / Change / Call / Direct
entry to main menu