Auta COMPACT VISUALTECH Manual De Instrucciones página 21


Open the door pressing ()

Pass the call to the corresponding tenant ()

Perform a consult to the flat (). See note "Consult", page 8.

Readdress the incoming call to another flat and pass it (OK+search+)

Readdress the incoming call to another flat and perform a consult
(OK+search+) to the chosen tenant.
Figure 3. Call from the panel 14 to the monitor 129.
Call with the code 0 (Call to the guard porter):

The call will be handled like any other, except it will not be passing to directly (the
code 0 is forbidden for monitors /telephones). It will be necessary to redirect.

If the SB receives this code the screen will show m/t=0 with number of the Panel
the call comes from (see Figure 4). It will make the ringing tones, doesn't matter the
operation mode it is configured and, after picking the handset up, the call may be
readdressed as a consult () or as a simple call () to any tenant in the installation.
Calling to


Figure 4. The screen shows a call to guard porter.
auta
Panel: 14
Calling to


auta
Panel:14
OK Change

20
VISUALTECH SWITCHBOARD
m/t:129
OK Change
 Pass to
m/t: 0
Pass to
User Guide