Mopar K6861642 Manual Del Usario página 15

43. Locate the existing RF Hub Module on the back
wall of the cab. Disconnect all harness connectors.
Remove two (2) push pin fasteners. Remove the
RF Hub Module.
44. Place the new RF Hub Module (C) into position.
Secure the RF Hub Module to the wall with two (2)
push pin fasteners provided (F) and reconnect all
harness connectors.
45. Remove the fasteners and the two (2) hooks from
the back edge of the headliner. Carefully pry down
the headliner far enough to locate the antenna
mounting holes above the rear window.
7/28/15
15