Mopar K6862495AB Manual Del Usario página 2

2
1. Log on to https://dealerconnect.chrysler.com.
2. In the "Service tab"-"Warranty Administration" box -"Vehicle Option Updates" screen, enter the vehicle VIN and add
the sales code XBM (Remote start) as a "Dealer Installed Option".
3. Confirm that the new sales code has been successfully added to the VIN.
1. With the WiTECH tool connected to both the Internet (via Ethernet port or wireless connection) and the vehicle,
follow the steps below:
2. Place the ignition into RUN using one of the existing FOBIKS.
3. Use the WiTECH tool to run “Restore BCM Proxi Configuration” which can be found in the diagnostic procedure
(wiTech 1) or Vehicle preparation (wiTech 2) tab of the main topology screen. Following the prompts will upload the
new vehicle PROXI configuration to the BCM.
4. Turn ignition off.
9/16/16
Obtain 4-digit PIN number from authorized dealership personnel.