Kohler K-11000 Manual Del Usario página 5

Flow Restrictor
Valve
Valve Body
O-Ring
Servicing the Faucet
Turn the valve upside down. Using a thin flat blade, carefully pry
the flow restrictor out of the valve.
Inspect the flow restrictor for blockage or damage.
Replace the flow restrictor if it is damaged or badly blocked.
If there is no blockage or damage, thoroughly rinse and clean the
flow restrictor.
Inspect the valve seal for damage. Replace damaged seals.
Inspect the valve body O-ring for damage and alignment.
If needed, realign the O-ring or replace if damaged.
Inspect the sides of the valve body for dirt and mineral buildup.
If needed, carefully clean the sides with a soft, non-abrasive
brush.
Flush the faucet with clean water.
Reinstall the flow restrictor, taking care to press on the outer
edges to avoid damaging it.
Kohler Co. 5 1000637-5-D