Luxury-Lift ® Hand Wand Removal Instructions; Luxury-Lift Hand Wand Installation Instructions - LAZBOY Gold Luxury-Lift Instrucciones De Operación

Luxury-Lift
Removal Instructions
WARNING
– To reduce the risk of burns, fire, electric shock,
serious injury or death:
• Unplug the power cord before connecting or disconnecting the hand wand.
1. Unplug the 120 volt power cord from the electrical outlet.
2. Stand behind the chair and disconnect the power supply from the chair. Locate the connection
behind the chair, push down the locking tab and pull the connectors apart (F
3. From the front of the chair, locate the hand wand connection on the seat. Open the locking
cover and gently pull the connection apart to separate the hand wand from the body (F
Store the hand wand out of reach of children.
F 1
IGURE
Power Supply Connection
22
® Hand Wand
1).
IGURE
F 2
IGURE
Hand Wand Connection with Locking Cover
WARNING
• Unplug the power cord before connecting or disconnecting the hand wand.
1. Unplug the 120 volt power cord from the electrical outlet.
2. Stand behind the chair and disconnect the power supply from the chair. Locate the connection
behind the chair, push down the locking tab and pull the connectors apart (F
3. From the front of the chair, locate the hand wand body connector near the back of the seat.
Align the arrow on the hand wand connector to the arrow on the body connector and push
2).
IGURE
together until fully seated, THEN back the connection out slightly (F
cover to secure the connection. (F
4. Connect the power supply to the chair.
DANGER
• Plug directly into a wall outlet. Do not use an extension cord, adapter or surge protector.
5. Plug the 120 volt power cord directly into the electrical outlet.
F 1
IGURE
Power Supply Connection
Luxury-Lift ® Hand Wand
Installation Instructions
– To reduce the risk of burns, fire, electric shock,
serious injury or death:
3).
IGURE
– To reduce the risk of electric shock, serious injury
or death:
F 2
IGURE
F 3
IGURE
Hand Wand Connection
secured with Locking
Cover closed
1).
IGURE
2). Close the locking
IGURE
Fully seat the
Connectors,
then back out
slightly before
closing the
Locking Cover
23