Luxury-Lift Power Recliner Operating Instructions - LAZBOY Gold Luxury-Lift Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Luxury-Lift
Operating Instructions
Gold Luxury-Lift
with 6-Motor Massage and Heat Operation Continued
®
To sit down in the chair:
1. Stand beside the chair and press down on the front LIFT button and hold, or press the back
toggle down and hold. Release the button or toggle when the chair reaches a comfortable height
to sit against, depending on your personal needs and preference.
2. Step back into the chair and sit in the center of the seat while keeping your feet firmly
on the floor.
3. Press down on the front RECLINE button and hold, or press the back toggle up and hold to lower
the chair. Release the button or toggle when the chair reaches the seated, home position. There
is a two second delay that occurs when the chair arrives at its seated, home position; the chair
starts the recline function after the delay.
To recline the chair:
As with the lift feature, there are multiple modes of operation to recline the chair. The back and
legrest recline movements are both synchronous and independent. The back and legrest recline
are programmed to move together using the front, large round LIFT and RECLINE button at the
top of the hand wand, or the toggle on the back of the hand wand. The back and legrest recline
are programmed to move independently using the front, oblong BACK and LEGREST buttons. The
independent operation allows you to recline the back without raising the legrest, raise the legrest
without reclining the back, or make individual adjustments to the back and legrest recline, which
are outside the synchronous movement.
1. With the chair in the seated position, to recline the back and raise the legrest at the same
time, press and hold the front, large round RECLINE button, or press the back toggle up and
hold. To recline only the back or raise only the legrest, press and hold down on the right side
of the appropriate front, oblong BACK or LEGREST button. Release the button or toggle when
you are in a comfortable position.
2. Make adjustments to the back and legrest recline as preferred.
3. To return the chair to the upright, seated (home) position, press and hold down on the front,
large round LIFT button, or press and hold the back toggle down. Release the button or toggle
when you reach the upright, seated (home) position. There is a two second delay that occurs
when the chair arrives at its seated, home position; the chair starts the lift function after the
delay when the front, large round button or back toggle is pressed and held. Additionally, you
may press and hold down on left side of the front, oblong BACK button, followed by the
LEGREST button, releasing the button when the movement reaches its end of travel and stops.
To stand up from the chair:
There are multiple modes of operation for the lift feature. Both the front, large round LIFT button
at the top and the back toggle provide a coordinated movement of the lift function. The back must
be fully upright and the legrest fully closed for the lift feature to function.
1. Firmly position your feet on the floor to maintain balance and prevent sliding or falling. Press
down on the front LIFT button and hold, or press the back toggle down and hold, to raise the
chair to the standing position.
2. Release the button or toggle when the chair reaches a height that enables you to comfortably
stand. Carefully exit the chair.
3. Return the chair to the seated (home) position if you will be away from the chair for an
extended period of time. Press down on the front RECLINE button and hold, or press the back
toggle up and hold to lower the chair. Release the button or toggle when the chair is in its
seated (home) position.
NOTE: The system includes a built-in two second delay that occurs when the chair arrives at its
seated, home position. The chair starts the reclining function immediately following the two second delay.
14
(Operating Instructions Continued)
®
Power Recliner
Luxury-Lift
Operating Instructions
Gold Luxury-Lift
with 6-Motor Massage and Heat Operation Continued
®
To use the massage and heat features:
The heat and massage functions are independent of each other, as are the back and seat heat.
The massage, back heat and seat heat can be operated individually or simultaneously.
The heat and massage features include an automatic timer to shut off the MASSAGE and HEAT
functions after approximately 15 minutes* of operation. You can restart the heat and massage
features for one additional 15 minute period of operation, but will need to give the system a rest
after two consecutive 15 minute periods of operation. Activated heat and massage functions are
temporarily suspended when either the LIFT or RECLINE motor is in use.
1. Press the left side of the HEAT button to activate the back heat. Press the right side of the
HEAT button to activate the seat heat.
Press the button once for low heat, indicated by an amber LED.
Press the button twice for high heat, indicated by a red LED.
Press the button a third time to turn off the heat.
2. Press the left side of the MASSAGE button to activate the massage feature. Press the right
side of the MASSAGE button to set the intensity of the massage.
Press the left side of the MASSAGE button once to turn on the massage feature.
- Press once for constant on mode, indicated by a green LED.
- Press twice for wave mode, indicated by an amber LED.
- Press three times for pulse mode, indicated by a red LED.
- Press a fourth time to turn off the massage; the LED turns off when the feature is off.
Press the right side of the MASSAGE button to set the intensity of the massage mode.
- Press once for low intensity, indicated by a green LED.
- Press twice for medium intensity, indicated by an amber LED.
- Press three times for high intensity, indicated by a red LED.
* The heat and massage features will run for up to two 15 minute cycles. After two continuous
cycles, the heat and massage will shut down.
Allowing the system to cool down for 7½ minutes will provide one 15 minute heat and
massage cycle.
Allowing the system to cool down for 15 minutes will provide two 15 minute heat and
massage cycles.
(Operating Instructions Continued)
®
Power Recliner
15

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido