Assembly Instructions - LAZBOY Gold Luxury-Lift Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Luxury-Lift

Assembly Instructions

WARNING
– To reduce the risk of serious injury:
• Check the condition of the power supplies, electrical cords, plug and connectors often.
Keep the power supplies and electrical cords away from heat sources. Never operate the
unit with a damaged power supply, electrical cord, plug or connector. Contact your
La-Z-Boy
®
dealer for service.
13. Connect the power supply connectors.
Remove the power supply from the box and unwind the cord.
Align the clips on the power supply connector and the connector behind the chair
and push the connectors together until they lock (F
DANGER
– To reduce the risk of serious injury or death:
• Plug directly into a wall outlet. Do not use an extension cord, adapter or surge protector.
NOTICE:
To prevent product damage operate this chair only when
it is upright, setting on its base.
14. The automatic homing feature returns the lift chair to the seated position after power is restored
following a power interruption. This feature may cause the lift chair to move slightly when plugged in.
Plug the power supply directly into a wall outlet.
15. Stand beside the chair and press the LIFT button on the hand to raise the chair. Raise the chair until
the inner body back panel is slightly above the outer body back panel (F
16. Locate the fastening tape on the back upholstery cover and the fastening tape on the inner body
back panel (F
12).
IGURE
Pull the back upholstery cover down tight. Firmly press the fastening tape on the back upholstery
cover to the fastening tape on the inner body back panel (F
Press the RECLINE button on the hand wand to lower the lift chair.
NOTICE:
To prevent damage to the connectors and cords, it is important
to unfasten all connections prior to removing the back.
17. Proceed to the Battery Backup Assembly Instructions.
18. To remove the back, unplug the power supply from the electrical outlet and disconnect the
power supply connection at the base of the chair. Reverse the Assembly Instructions steps.
10
Power Recliner
®
11).
IGURE
12).
IGURE
13).
IGURE
Luxury-Lift
®
Assembly Instructions
F
11
IGURE
Power Supply Connection
F
13
IGURE
Power Recliner
F
12
IGURE
Back
Inner Body
Outer Body
Upholstery Cover
Back Panel
Back Panel
11

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido