Sedus se:motion net Instrucciones De Uso página 3

Function
A Height of the seat
Lowering the seat:
P
1.
lever upwards (the seat will drop slowly)
the lever at the desired height will lock the position
Raising the seat: Stand up
P 1.
(the seat will rise slowly)
desired height will lock the position
B Backrest tilt
Locking the backrest: remove the load on the back­
P
rest, push the slider to the right = backrest is locked
Releasing the lock: remove the load on the backrest,
P
push the slider to the left = backrest is dynamically
adjusted
C Adjusting the armrests
Raising the armrests: Raise the armrests to the
P
desired height – armrests lock in place automatically
Lowering the armrests: Pull the armrests all the way
P
up and lower them to the desired height
E
Sit down on the seat
2.
Releasing
3.
Pull the lever upwards
2.
Releasing the lever at the
3.
D Adjusting the height of the lumbar support
Raise or lower the lumbar support to the desired
P
height by moving it up and down
Pull the
E Height of the footring (counter underframe)
Adjusting the footring:
P
anticlockwise – the footring loosens
footring to the desired position
screw clockwise
Tips for users
Correct use
This conference swivel chair is designed for a user
weight of up to 130 kg and may only be used for the pur­
pose intended while exercising due care and attention.
Using it inappropriately (e.g. as a stepladder, sitting on
the armrests or placing extreme weight on one side)
could result in accidents.
Seat height adjustment
We recommend cleaning the piston rod regularly with
a cloth. Other work on the gas spring, e.g. replacement,
may only be carried out by trained staff.
Castors
A variety of castors are available, for the sake of your
safety and for use on different types of flooring in
accordance with safety regulations:
– hard castors for soft flooring (standard),
– soft castors for hard flooring are optional.
Changing castors: this might be necessary, for instance,
after moving office, or after the instal lation of a new
floor covering – simply pull out the castors and push
new ones in.
Plastic parts
Soapy water is suitable for cleaning. Please do not use
any aggressive cleaning materials.
Upholstery/membrane
Textiles should be vacuumed regularly. Remove stains
immediately with lukewarm water and a damp cloth.
In the case of light damage or soiling to the upholstery,
please only use suitable delicate cleansing agents,
or Sedus cleaning foam. The upholstery and membrane
covering of the backrest can only be changed at
the factory.
Turn the knurled screw
1.
Move the
2.
Tighten the knurled
3.