Stell SHO 1020 Instrucciones De Montaje página 13

Mounting of bracket on TV set
TV set with fl at rear wall (Fig. 5A)
First fi nd the screws suitable for mounting the TV (E/F/G/H): try to screw them manually into the holes
on the back of the TV. If you feel resistance stop screwing in immediately! Once you fi nd the screw with
the correct threat proceed according to the drawing 5A. Insert matching lock washer on the screw (M/N/
O/P), washer (S/T) and then screw the screw to the bracket B/C and then to the TV. Make sure that
the brackets are vertically aligned and parallel with each other.
TV set with curved rear wall (Fig. 4B)
First, fi nd the screws suitable to mount the TV set (I/J/K/L): try to screw them manually in the holes
at the back of the TV set. If you feel resistance stop screwing in immediately! Once you fi nd the screw
with the correct threat proceed according to the drawing 5B. Insert on the screw the corresponding lock
washer (M/N/O/P), washer (S/T), then screw the screw in the bracket B/C, insert a spacer from the
other side Q/R and fi nally screw the screw in the TV set. When using screws with the thread M4 or M5, you
will have to insert another washer between the spacer and the bracket S. Make sure that the brackets are
vertically aligned and parallel with each other.
Attaching brackets to the holder
Warning: Handling some TV sets requires help of another person. The manufacturer is not liable for injury or
damage to property caused by improper handling!
First, hook the bracket attached to the TV set (B/C) to the upper edge of the wall plate A. Then push
down the bottom of the bracket to the bottom part of the wall plate. (Fig. 6). Then push each "L" shaped plate
upwards and tighten the screws using a screwdriver (Fig. 7).
Congratulation, the installation is done. We wish you a pleasant experience while watching TV mounted on
the wall mount.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
Take the used packaging material to the municipal waste disposal.
PRODUCT DISPOSAL AFTER END OF LIFE
Dispose of equipment after the end of life in the designated municipal solid waste place
This product meets all the basic requirements of EU directives that apply to it.
13 – EN