Tabla de contenido
Publicidad
PARTES Y COMPONENTES
1.
Mango Superior
2.
Tubos de Extensión
(x2)
3.
Tubo de Extensión del Mango Inferior
4.
Mango Inferior
(Viene dentro del compartimiento para la tierra)
5.
Perno y Tuerca de Retención
(Ubicados en el pivote del mango inferior)
6.
Luz Indicadora de Carga
7.
Llave de Encendido
8.
Cargador: Utilice Únicamente KUANTECH
KA12D075015023U
(viene dentro del compartimiento para la tierra)
9.
Compartimiento para la Tierra
10.
Cubierta Transparente del Cepillo
11.
Cepillo Giratorio
12.
Cabezal eléctrico de la barredora
* El dibujo puede no ser igual al producto real.
NOTA
: Los Barredores Inalámbricos vienen con las baterías
descargadas. Necesita cargar la unidad por 20 horas antes de
usarla por primera vez. Use únicamente batería de reemplazo
# X1725QN.
10
OPERATING INSTRUCTIONS
CARE AND MAINTENANCE
To improve the performance and life of your unit, we recommend you do the
following:
1.
Once a month clean the unit with a dry cloth, including the chamber which the dust
container fits into. Remove any hair, fiber or other materials that may have built up
in the chamber, on the rotating brush.
2.
Don't use abrasive materials to clean the sweeper. Do not immerse the unit in
water.
3.
Do not pick up liquids or use on wet floors.
4.
Do not use on concrete, tar or similar rough surfaces.
5.
Don't pick up pieces of string or fabrics with the sweeper.
6.
Do not clean tasseled or frayed carpets with the sweeper.
STORING THE CORDLESS SWEEPER
Your cordless sweeper may be stored by using the slot on the back of the upper handle
and hanging it from a screw secured to a wall or other vertical surface. Use a #6 flat or
pan head screw with the appropriate hardware for the surface that the sweeper will be
mounted on, (i.e. gyproc). Allow the screw head to extend a approximately 3/16" from
the mounting surface. Always empty your sweeper before hanging up for storage.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE REASON
1.
Batteries discharged.
2.
No power in electrical
SWEEPER WILL
outlet supplying charging
NOT OPERATE
adapter.
3.
Unit needs servicing.
4.
Battery misplaced.
SWEEPER WILL
1.
Dust container is full.
NOT PICK-UP
2.
Unit needs recharging.
DUST ESCAPING
1.
Dust container is full.
FROM SWEEPER
ROTATING BRUSH
1.
Unit clogged.
WILL NOT PICK UP
2.
Dust container is full.
1.
Electrical outlet not
working.
2.
Charging Adapter not
SWEEPER WILL
working.
NOT CHARGE
3.
Batteries no longer
functioning.
4.
Unit left in "On" position.
POSSIBLE SOLUTION
1.
Charge unit.
2.
Check fuse or breaker.
Replace fuse/reset breaker.
3.
Call Customer Service.
4.
Connect the wire terminal from
the unit to the wire terminal of
the new battery pack.
1.
Empty dust container.
2.
Charge unit.
1.
Empty dust container.
1.
Check for excessive material
on brush or in bottom of
sweeper. Remove obstruction
from brushes and/or sweeper.
2.
Empty and clean dust
container.
1.
Check to ensure outlet is
working properly. (Easily
checked by plugging in
another appliance.
2.
Replace charging adapter.
3.
See battery disposal.
4.
Press switch to "Off".
7
Publicidad
Tabla de contenido
