Screw Lock Type Crown; Rotating Bezel - Seiko 8L35 Instrucciones

SCREW LOCK TYPE CROWN

Some models have the screw lock type crown, which can be locked by the screw
l
when it is not necessary to be operated.
Locking the crown will prevent operating errors.
l
Unscrew the crown before any crown operation. When the operation is over,
l
screw the crown in to lock.
n HOW TO OPERATE THE SCREW LOCK TYPE CROWN
If your watch has a screw lock type crown, unscrew it before any crown operation.
v Always keep the crown locked unless it is necessary for operating the crown.
[To unscrew the crown]
Tu r n t h e c r o w n c o u n t e r c l o c k w i s e
(downward) to unscrew it. The crown is
unlocked and can be operated.
[To screw the crown in]
Upon completion of the crown operation,
screw the crown in completely until it
stops by turning it clock wise (upward)
while gently pressing it back into the
original position.
8

ROTATING BEZEL

The rotating bezel can show the elapsed time up to 60 minutes. By setting it before
diving, you can know how many minutes you are underwater.
To prevent accidental rotation, the rotating bezel is so designed that rotation
l
becomes harder in water. Also for safty's sake, it roatates only counterclock-
wise, so that the time measured is never shorter than the actual elapsed time.
1. Turn the rotating bezel to align its "
* The rotating bezel rotates with clicks. With each click, it turns half a minute.
2. To know the elapsed time, read the number on the rotating bezel that the
The crown can be pulled
minute hand points to.
out.
Example:
Turn the crown while
pressing it back in.
"mark with the minute hand.
Minute hand
"30" on rotating bezel
Start(10:10 AM)
" " mark
30 minutes have elapsed.
9