Screw Down Crown; Setting The Time And Adjusting The Stopwatch Hand Position - Seiko V176 Manual Del Usuario

SCREW DOWN CROWN

(for models with screw down crown)
•
Your watch has a screw down crown to prevent accidental operation and help
maintain water-resistant quality.
• To use the crown, it is necessary to unlock the crown first before pulling it out,
and it is important to securely screw the crown in after each use.
HOW TO OPERATE THE SCREW DOWN CROWN
The crown must be securely locked in the case except when you use it to set the watch.
<How to unlock the crown>
Turn the crown counterclockwise to unscrew it.
The crown is released and projected outward
from its original position.
<How to lock the crown>
Turn the crown clockwise while pressing it to
the case until it is screwed all the way in and
locked.
1. Do not operate the crown when the watch is wet or in water.
2. When screwing the crown in, ensure that the crown is correctly aligned and turn it
gently. If it is hard to turn, unscrew it first, and then rewind it. Do not screw it in by
6
force as it may damage the thread of the screw or the case.
The crown is unlocked
and can be pulled out.
The crown is locked.
SETTING THE TIME AND ADJUSTING
THE STOPWATCH HAND POSITION
l This watch is designed so that the following adjustments are made with the
crown at the second click position:
1) main time setting
2) stopwatch hand position adjustment
Once the crown is pulled out to the second click, be sure to check and adjust
1) and 2) at the same time.
Unlock, and then pull out to the second click when the second hand is
CROWN
at the 12 o'clock position.
1. MAIN TIME SETTING
Hour hand Minute hand
Small second hand
Turn to set the hour and
CROWN
minute hands.
7