Groeneveld TriPlus Manual Instrucciones De Uso página 6

Tests
In order to check the system a single lubrication can be performed.
1. Switch ignition on.
2. Select the grease outlet (1, 2 or 3) on the pump which you want to
check through depress shortly (shorter than one second) the test but-
ton one, two or three times.
3. The test cycle starts after two seconds after the test button is
depressed for the last time. During this test cycle the lamp will flash
with a certain frequence. The frequence will indicate on which outlet
the pump is running.
Grease recommendations
Grease should not contain graphite or PTFE. Use of the correct grease in the
TriPlus system is of utmost importance.
Groeneveld recommends the use of our GreenLube grease.
6
XU1601D