Publicidad
Idiomas disponibles
Idiomas disponibles
sera marin Biotop LED Cube 130
US
Instructions for installation and use
sera marin Biotop LED Cube 130
Please read these instructions carefully and keep for future use. When forwarding this unit to third parties, this
information for use is also to be handed over.
Thank you for choosing the new sera marin Biotop LED
Cube 130.
The newly developed LED cover with 18 powerful LED
chips in modern SMD technology is 33% brighter than
the aquarium covers with fluorescent tubes, whereas the
power uptake is only half as high.
Besides saving energy you will also benefit from the long
lifetime of the LED chips. Lamp replacement is no longer
required every year, and even single LED units failing hard-
ly affects brightness in the aquarium. The lighting can still
be operated without any problems until the faulty LED unit
has been replaced.
The new sera marin Biotop LED Cube 130 of course pro-
vides the well proven 3 side view due to the bow front. This
allows watching the aquarium inhabitants easily also in the
sera marin Biotop LED Cube 130.
The larger skimmer sera marin Protein Skimmer PS 200
is another benefit. The increased skimming performance
improves water quality, and the frequency of water chang-
es can be reduced.
General notes
• Please read these instructions carefully and keep for
future use. Also, please check your sera aquarium for
completeness.
• Please switch off all submerged technical devices by
pulling their mains plugs before touching the water with
your hand.
The aquarium is optimally packed. However, damag-
es due to long range transport may have occurred, as
is the case with all glass products. Therefore please
check whether the glass is in order before filling the
aquarium for the first time.
Kit includes
Plug-in complete equipment
ready to start
Aquarium with bow front (fig. 1.1)
Polished glass
Volume c. 130 liters (34 US gal.)
Dimensions with closed cover: W 51 cm x H 62.6 cm x
D 58 cm (20 in. x 24.6 in. x 22.8 in.)
Aquarium cover (1.2, 1.3) with
• 12 white light LED chips with 10 * 0.2 W LEDs in SMD
technology each (1.2.1)
• 6 blue light LED chips with 10 * 0.2 W LEDs in SMD
technology each (1.2.2)
• actinic blue light
• neutral daylight
• 2 fans for cooling the electronic components
• built-in food flap (1.3)
• maintenance flap for the 4 chamber internal filter (1.2.3)
• openings for connecting a cooling system or accesso-
ries (1.2.4)
• sera ballast Input 100 – 240 V 50/60 Hz, Output
12 V DC 3 A (1.2.5)
4 chamber internal filter (1.5) with
• 2 filter sponges for mechanical filtration (1.5.1)
• sera siporax Professional 2.000 ml (580 g / 1.2 lb.) for
biological filtration (1.5.2)
1 liter (1 US quart) sera siporax Professional – pro-
vides as much settling space for bacteria as, for
instance, 34 liters (9 US gal.) of clay filter material.
• sera filter pump STP 1000 (1.5.3)
• sera marin Protein Skimmer PS 200 (1.5.4)
• sera UV-C Clarifier 5 W (1.5.5)
• sera heater 100 W (1.5.6)
sera flow distributor with two adjustable flow noz-
zles (1.6)
100 ml (3.38 fl.oz.) sera aquatan water conditioner (1.7)
100 ml (3.38 fl.oz.) sera marin bio reefclear bio cultures
for the biological breakdown of harmful substances (1.8)
This part of the information for use refers to operating the
LED cover and the glass tank.
Please read the according information for use for operat-
ing the included devices.
Assembly and operation
First assemble the cabinet, if applicable (cabinet is not
included). Please note the instructions included with the
cabinet to do so.
Location:
Place the sera aquarium in a suitable location. Depending on
the internal decoration, the aquarium may weigh up to 200 kg
(441 lb.). Therefore, the chosen location should be perfectly
even (best use a spirit level for balancing). Of course, a mains
supply should be available nearby. If you have purchased the
aquarium without a cabinet and wish to place it on an already
existing piece of furniture, it must provide sufficient carrying
capacity. The aquarium should by no means be placed near
a sunny window. Too much sunlight does not only heat up
the aquarium too strongly, but may also cause algae blooms.
The sera marin Biotop LED Cube 130 is equipped with a
glued-on safety frame. Place the aquarium with its frame
directly onto the cabinet. Do not use any additional mats.
16
Publicidad
