Adjusting Nail Drive; Selecting Trigger Operation - Grip Rite GRTFR83 Manual Del Operador Y Lista De Piezas

ADJUSTING NAIL DRIVE

1. Disconnect tool from air supply
using quick-connect coupling.
2. Turn adjustment dial (D)
backward toward magazine to
increase nail drive, or forward
toward front of tool to de-
crease nail drive, as shown by
nail symbols on tool.
3. Connect tool to air supply, and
drive nails to check for correct
depth of drive.
4. Make depth of drive adjust-
ments as needed to maintain
consistent nail driving.
SELECTING TRIGGER OP-
ERATION
1. Disconnect tool from air
supply using quick-connect
coupling.
BUMP FIRE OPERATION
2a. Slide the selector button (E)
on the trigger to the forward
position.
SEQUENTIAL FIRE
OPERATION
2b. Slide the selector button (E)
on the trigger to the rear posi-
tion.
3. Connect air tool to air supply
at quick-connect coupling.
NAIL TOO HIGH
TURN DIAL
BACKWARD
11
OPERATION
D
NAIL TOO DEEP
TURN DIAL
FORWARD
E
E