Publicidad
Idiomas disponibles
Idiomas disponibles
EN
FastFerment™ proces
Pour ingredients
into the
FastFerment™.
Dump, clean &
sanitize the
collection ball.
11
When secondary
fermentation is
done, close
the valve.
Best Practices – Important Notices
1. Never ever rest the FastFerment™ on its collection ball.
2. Always make sure to clean the unit thoroughly before use with cleaning product and a soft sponge
or cloth. Never use anything hard like as a brush or scraper to clean the unit. It is important to avoid
scratching the inside of the FastFerment™ to ensure everything can funnel through properly and to
avoid contamination by residual dirt.
3. It is advised to completely disassemble the unit and clean it thoroughly every 6 months. This will
help ensure the longevity of the parts and the quality of your beer & wine. Extra care and attention
must be taken to ensure the plastic threads are not damaged when taking apart or putting the unit
back together.
4. Mount FastFerment™ out of direct sunlight.
5. It's best to avoid long-term aging in the unit unless head space is filled with CO
6. Do not apply direct heat such as a flame or heat gun to the system. It will melt the plastic.
7. Thermowell Cleaning. The Thermowell is removable from the unit. The Thermowell is threaded into
the stainless steel nut in the plastic wall of the FastFerment™. Make sure to use Teflon Teak Tape on
the threads of the Thermowell when putting back in.
8. Don't use hot water to clean the grey plastic parts around the valve, use lukewarm water up to
60 °C instead.
12
1
2
Screw on the lid
with airlock.
6
7
Or harvest the
yeast to reuse.
12
Remove the
collection ball.
3
Allow time for
When primary
primary
fermentation is
fermentation
done, close the
with valve open.
valve.
8
Reattach the
Open the valve.
collection ball.
13
Attach the
Adjust the
filling hose.
hose clamp.
4
5
Remove the
collection ball.
9
10
Allow time for
secondary
fermentation
with valve open.
14
15
Bottle or keg
& enjoy!
, not oxygen.
2
Publicidad
